CARACTERÍSTICAS DEL HARDWARE
Interface Mini USB
Botón WPS
Dimensiones (W X D X H) 90.8*60.7*24mm
Estándares Inalámbricos IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Tipo de Antena 2 Antenas Omni-direccionales Desmontables (RP-SMA)
Rendimiento de la Antena 5dBi
CARACTERÍSTICAS INALÁMBRICAS
Frecuencia 2.4-2.4835GHz
Velocidad de Señal Tx Hasta 150Mbps
Rx Hasta 300Mbps
EIRP Modos Inalámbricos Ad-Hoc / Modo de infraestructura
Seguridad Inalámbrica Soporta WEP, WPA/WPA2, WPA-PSK/WPA2-PSK de 64/128 bit
OTROS
Contenido del Paquete TL-WN8200ND
2 Antenas Omni-direccionales Desmontables de 5dBi
CD de Recursos
Guía de Rápida Instalación
Cable de Extensión USB de 1.5m
Requisitos del Sistema Windows 7(32/64bits),
Windows Vista(32/64bits),
Windows XP(32/64bits)
Ambiente Temperatura de Operación: 0℃~40℃ (32℉~104℉)
En soluciones inalambricas la estabilidad de la conexion y el ancho de banda dependen proporcionalmente de la calidad de la conexion entre el dispositivo cliente y la fuente de la red WiFi. chequee los detalles del producto y como se ajusta a al resto de dispositivos y el lugar en que se conectan. Si su problema es puntualmente de cobertura tenga en cuenta que: 1) El tener mas cantidad de antenas de ninguna manera amplia el rango de cobertura o la potencia (es un mito), a menos que el producto lo indique, solo agrega ancho en la banda o que trabaje en bandas distintas, 2) El rango de cobertura y la potencia de la misma solo puede ser modificado por la potencia en mW (Mili Watts) o W (Watts) de salida, en algunos modelos de producto no es modificable y puede o no indicarlos por las regulaciones europeas (dentro de los de interior se trabajan de 200 a 350mw dependiendo el producto con excepciones como en la linea High Power de TpLink que llegan casi a 1W) y los DBI correspondientes a la antena (modificable si el producto cuenta con conectores SMA o N) y esto se cumple tanto para las fuentes de señal WiFi como routers, access points, CPEs, etc. como para los dispositivos clientes como placas de red inalambricas, access points, repetidores, CPEs, etc. ya que para tener una conexion estable el cliente tiene que estar en el rango de cobertura de la fuente de wifi como la fuente en el rango del cliente.